Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 26-04-2005, 08:12 PM   #1
MaD_KiWi
Happy as Larry
 
MaD_KiWi's Avatar
 
Join Date: Dec 2004
Location: SE Melb
Posts: 364
Default The "KIWI" does 11's

After running at Heathcote a week before the Nats to get some shakedown runs, i ran off a few 11.8's @ 118 and 119mph

With some new slicks and front runners at the Nats was running consistent 11.6's and 11.7's @ 119mph with 60ft of high 1.6's and low 1.7's which at the Nats was my first ever time on full SLICKS

When the weather went COLD went out for a big one to see what would happen. And with a big launch pulled off a 1.62 60ft and ran a lazy

11.53 @ 120.4mph. not bad for not even setup yet

Its one of Nathans H/C packages, but i opted not to go for the tune so its not his tune in my car. so cant wait til next time i go out fully tuned!!

Thanks to

Nathan Higgins
Steve @ F1
Toby James
Shine Auto body Works

And cant forget Phonsy on the RIP Shift!!! its Faarrkkiinn awesome!!

And also cant forget

Tuna
Justice
PlanB
Russell & Joanne

Headbutts to Benny

Grant, Ant Snr, Ant Jnr, Alex, Val and his crew, and Kerrie

Here is a pic



BIG LAUNCH



Front burnout



Nathan Higgins


Last edited by MaD_KiWi; 27-04-2005 at 10:26 AM.
MaD_KiWi is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:18 PM   #2
Damo
Banned
 
Join Date: Dec 2004
Posts: 4,078
Default

Nice work simon, I see your car getting around the streets a bit. I was filling up next to you once at Mobil on whitehorse rd, just before it becomes Maroondah HWY, i was in my mums VS and too shy to come up and say hi. :$

That's damn quick!
Damo is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:21 PM   #3
rodderz
.
 
rodderz's Avatar
 
Join Date: Dec 2004
Location: Bundoora
Posts: 7,199
Default

Well done Simon....bloody quick!

Great launch too... and funny that it wasnt that long ago the black car was doing 13's!
rodderz is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:22 PM   #4
dansedgli
FF.Com.Au Hardcore
 
dansedgli's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
Default

NIce work! What power is it making now?
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi.
dansedgli is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:32 PM   #5
HEMI POWER
N/A BOSS 390+
 
HEMI POWER's Avatar
 
Join Date: Jan 2005
Posts: 3,648
Default

Quote:
Originally Posted by MaD_KiWi
After running at Heathcote a week before the Nats to get some shakedown runs, i ran off a few 11.8's @ 118 and 119mph

With some new slicks and front runners at the Nats was running consistent 11.6's and 11.7's @ 119mph with 60ft of high 1.6's and low 1.7's which at the Nats was my first ever time on full SLICKS

When the weather went COLD went out for a big one to see what would happen. And with a big launch pulled off a 1.62 60ft and ran a lazy

11.53 @ 120.4mph. not bad for not even setup yet

Its one of Nathans H/C packages, but i opted not to go for the tune so its not his tune in my car. so cant wait til next time i go out fully tuned!!

Thanks to

Nathan Higgins
Steve @ F1
Toby James
Shine Auto body Works

And cant forget Phonsy on the RIP Shift!!! its Faarrkkiinn awesome!!

And also cant forget

Tuna
Justice
PlanB
Russell & Joanne

Headbutts to Benny

Grant, Ant Snr, Ant Jnr, Alex, Val and his crew, and Kerrie

Here is a pic

Well done KIWI :
__________________
WOOOOOOOOOO
FPV GT 03 /341 RWKW OF N/A POWER.
XB GT 73 /OLD FORD MUSCLE
ALL AUSSIE MUSCLE
HEMI POWER is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:40 PM   #6
paul7v7
bring it on
 
paul7v7's Avatar
 
Join Date: Dec 2004
Location: Praying....for you
Posts: 987
Default

DAAAMN thats a quick car...well done mate.
__________________
Here is the devil-and-all to pay.
paul7v7 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:49 PM   #7
MaD_KiWi
Happy as Larry
 
MaD_KiWi's Avatar
 
Join Date: Dec 2004
Location: SE Melb
Posts: 364
Default

Quote:
Originally Posted by dansedgli
NIce work! What power is it making now?
I touched over 300rwkw. so i picked up about 50odd rwkw with Head & Cam package
MaD_KiWi is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:49 PM   #8
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,637
Default

Good on ya mate, well done, hopefully soon you can have some competition from the blue boy's, although I think it's a little while off yet seeing a Boss run consistent mid 11's, what are the Boss boy's doing, lol.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 08:57 PM   #9
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

NICE! Top effort mate.
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 09:37 PM   #10
Laminge
Cuban... nothing like it
 
Join Date: Dec 2004
Location: Watching in amusement
Posts: 11,643
Default

Red Cordial does wonders mixed in with the fuel system!

Well done Simon
__________________
Quote:
Originally Posted by Laminge
...its amazing how mud sticks to ones shoes, as flies do to the elderly and bottle blondes around fame and fortune...
Laminge is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 10:25 PM   #11
HEMI POWER
N/A BOSS 390+
 
HEMI POWER's Avatar
 
Join Date: Jan 2005
Posts: 3,648
Default

Quote:
Originally Posted by galaxy xr8
Good on ya mate, well done, hopefully soon you can have some competition from the blue boy's, although I think it's a little while off yet seeing a Boss run consistent mid 11's, what are the Boss boy's doing, lol.
Mid 12's at the moment. :eclipsee_
__________________
WOOOOOOOOOO
FPV GT 03 /341 RWKW OF N/A POWER.
XB GT 73 /OLD FORD MUSCLE
ALL AUSSIE MUSCLE
HEMI POWER is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:24 PM   #12
SpoolMan
Solution Was Boost 4?, 6 & 8
 
SpoolMan's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
Chairman's Award: Chairman's Award - Issue reason: The exceptional contribution made to AFF events and sponsorship. Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Everything you do to help this place run smoothly! Technical Contributor: For members who share their technical expertise. - Issue reason: The awesome Technical and Service how to's in the FPV /XR6 /G6ET turbo threads..  and his own build threads that inspire people to have a go... enabling people to save money and realise the dream of working on their own cars as well. 
Default

Very Quick, Well done..
Who will do your full tune?
__________________
[SIGPIC][/SIGPIC]

AUTOTECH TUNED EDELEBROCK CHARGED
2017 GT Mustang Plenty of RWKW
SpoolMan is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:35 PM   #13
XRQTOR
Banned
 
XRQTOR's Avatar
 
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
Default

What springs and shocks you running in the back, jeez th car gets awfully low on the launch doesn't it. Great time mate well done.

How light are those skinnies up front, is it worth swapping the standard rims for them.
XRQTOR is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:36 PM   #14
smciner1
Detroit Locker Equiped TM
 
smciner1's Avatar
 
Join Date: Dec 2004
Location: Area 51 (tm)
Posts: 4,928
Default

Quote:
Originally Posted by Laminge
Red Cordial does wonders mixed in with the fuel system!

Well done Simon
Beat me to it Gary.

Well done Simon!
__________________
Apollo Blue 1974 XB Falcon GT, 557 HP
Blue Pearl 2004 BA FPV GT, 290 kW

Quote:
Originally Posted by MRJUCY
Simple give the car a rev & have a listen a Windsor makes a sort of wheezy drone similar to an angry Hugh Grant when a Clevo will sound like Satan has woke up with a hangover & realized he is out of coffee & cigarettes
Falcon GT Club of Geelong.
http://www.facebook.com/FalconGTClubGeelong
smciner1 is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:42 PM   #15
ea ba turbo
chasing more power
 
ea ba turbo's Avatar
 
Join Date: Mar 2005
Location: around
Posts: 129
Default

what type of car are we talking here guys....

sorry to sound dumb but a little more info
would go a long way.. especially for us beginners
to this site..
ea ba turbo is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:51 PM   #16
brenx
FF.Com.Au Hardcore
 
brenx's Avatar
 
Join Date: Dec 2004
Location: Pakenham, Victoria
Posts: 6,983
Default

Congrats Simon. good to see you finally got rid of the street tyres ;)

[edit]Out of curiousity how many pass's has the car done now? 100? I've seen it done quite a few. It's good to see it going faster and faster.
__________________
74 XB Fairmont (street car) 11.07@123.02mph. 08 LV Ford Focus XR5 (daily).

Tuned by Hallam Performance

Last edited by brenx; 26-04-2005 at 11:53 PM.
brenx is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:55 PM   #17
outback_ute
Ute Forum Moderator
Contributing Member
 
outback_ute's Avatar
 
Join Date: Dec 2004
Location: Melb
Posts: 7,227
Default

Quote:
Originally Posted by ea ba turbo
what type of car are we talking here guys....
VX SS Commodore (there are photos!) looks like a series 2.

Well done Simon, how did you go in the LS1 Nats?
outback_ute is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:56 PM   #18
XRQTOR
Banned
 
XRQTOR's Avatar
 
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
Default

Quote:
Originally Posted by ea ba turbo
what type of car are we talking here guys....

sorry to sound dumb but a little more info
would go a long way.. especially for us beginners
to this site..
The massive picture at the bottom shows a SS comodore, VT or VX vintage. All i know is that it aint a Vy or a Vz.
XRQTOR is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2005, 11:59 PM   #19
ea ba turbo
chasing more power
 
ea ba turbo's Avatar
 
Join Date: Mar 2005
Location: around
Posts: 129
Default

thanks for that....no pic comes up on my screen
ea ba turbo is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 10:32 AM   #20
MaD_KiWi
Happy as Larry
 
MaD_KiWi's Avatar
 
Join Date: Dec 2004
Location: SE Melb
Posts: 364
Default

Quote:
Originally Posted by XRQTOR
What springs and shocks you running in the back, jeez th car gets awfully low on the launch doesn't it. Great time mate well done.

How light are those skinnies up front, is it worth swapping the standard rims for them.
Koni Rears. And HD King Springs, and they still squatted like a mofo. The skinnies are a lil lighter but not a huge amount


Quote:
Originally Posted by outback_ute
VX SS Commodore (there are photos!) looks like a series 2.

Well done Simon, how did you go in the LS1 Nats?
Well, I suck at dial your own, but I believe I was the 2nd fastest N/A 346ci for the weekend. Fastest was Nathan Higgins 10.8 or something.

Pics are up now on first post

Simon
MaD_KiWi is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 01:02 PM   #21
ebxr8240
Performance moderator
 
ebxr8240's Avatar
 
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical advice. 
Default

Under 12.5 you have run crossply if you are running slicks..With slcks you must aslo have tailshaft loop..You must have crossplys all round or radial slicks on back cannot mix clossply with radials... ....Rules....
__________________
Real cars are not driven by front wheels,real cars lift them!!...
BABYS ARE BOTTLE FED, REAL MEN GET BLOWN.
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Dart 330ci block turbo black pearl EBXR8 482 rwkw..
Daily driver GTE FG..
Projects http://www.fordforums.com.au/showthread.php?t=107711
http://www.fordforums.com.au/showthr...8+turbo&page=4
ebxr8240 is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 02:10 PM   #22
parawolf
beep beep
 
Join Date: Dec 2004
Location: Melbourne
Posts: 1,971
Default

Quote:
Originally Posted by Laminge
Red Cordial does wonders mixed in with the fuel system!

Well done Simon
More like Red Bull in the mix
__________________
Nothing to see here, move along, move along...
parawolf is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 07:37 PM   #23
MaD_KiWi
Happy as Larry
 
MaD_KiWi's Avatar
 
Join Date: Dec 2004
Location: SE Melb
Posts: 364
Default

Quote:
Originally Posted by ebxr8240
Under 12.5 you have run crossply if you are running slicks..With slcks you must aslo have tailshaft loop..You must have crossplys all round or radial slicks on back cannot mix clossply with radials... ....Rules....
ok.................................

um, i have all that, so facts straight first please :

Kiwi
MaD_KiWi is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 07:47 PM   #24
brenx
FF.Com.Au Hardcore
 
brenx's Avatar
 
Join Date: Dec 2004
Location: Pakenham, Victoria
Posts: 6,983
Default

Quote:
Originally Posted by ebxr8240
Under 12.5 you have run crossply if you are running slicks..With slcks you must aslo have tailshaft loop..You must have crossplys all round or radial slicks on back cannot mix clossply with radials... ....Rules....
Depends whether the events ANDRA sanctioned. I've seen plenty of 10sec cars not running cross plys on the front inc mine. As long as it tracks straight whats the problem?

When I used to run slower I used to get a slight wobble. Now I go faster I have no wobble at all. Go figure?
__________________
74 XB Fairmont (street car) 11.07@123.02mph. 08 LV Ford Focus XR5 (daily).

Tuned by Hallam Performance
brenx is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 07:59 PM   #25
MaD_KiWi
Happy as Larry
 
MaD_KiWi's Avatar
 
Join Date: Dec 2004
Location: SE Melb
Posts: 364
Default

Quote:
Originally Posted by brenx
Depends whether the events ANDRA sanctioned. I've seen plenty of 10sec cars not running cross plys on the front inc mine. As long as it tracks straight whats the problem?

When I used to run slower I used to get a slight wobble. Now I go faster I have no wobble at all. Go figure?
Well said bro,
MaD_KiWi is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 08:11 PM   #26
brenx
FF.Com.Au Hardcore
 
brenx's Avatar
 
Join Date: Dec 2004
Location: Pakenham, Victoria
Posts: 6,983
Default

A funny thing I witnessed with crossplys was @ the Hot rod show at Calder park. It was a little disturbing. "Mentle" (67 SS comaro) got the wobbles and rolled a crossply front runner off the rim. That could have been nasty considering he ran 9.5@154mph wheelspinning the whole 1/4.
__________________
74 XB Fairmont (street car) 11.07@123.02mph. 08 LV Ford Focus XR5 (daily).

Tuned by Hallam Performance
brenx is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 08:22 PM   #27
ratter
FF.Com.Au Hardcore
 
ratter's Avatar
 
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Shares his in-depth tuning knowledge with the forum, very helpful. Contributor: For members who make a contribution worthy of recognition. - Issue reason: For his indepth tutorial on adding borders to photographs 
Default

Quote:
Originally Posted by brenx
A funny thing I witnessed with crossplys was @ the Hot rod show at Calder park. It was a little disturbing. "Mentle" (67 SS comaro) got the wobbles and rolled a crossply front runner off the rim. That could have been nasty considering he ran 9.5@154mph wheelspinning the whole 1/4.
He actually had his throttle stick, and he tried to turn the bottom corner, thats why he peeled the tyre, would have been 1 scary ride though
ratter is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 08:26 PM   #28
brenx
FF.Com.Au Hardcore
 
brenx's Avatar
 
Join Date: Dec 2004
Location: Pakenham, Victoria
Posts: 6,983
Default

Quote:
Originally Posted by ratter
He actually had his throttle stick, and he tried to turn the bottom corner, thats why he peeled the tyre, would have been 1 scary ride though
I bet he has fitted a better return spring now ;) Definately looked scary. Even the 1st pass was entertaining. He did the side to side trick for the whole 1/4 leaving huge black lines. That cars nuts and so is the driver.
__________________
74 XB Fairmont (street car) 11.07@123.02mph. 08 LV Ford Focus XR5 (daily).

Tuned by Hallam Performance
brenx is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 09:07 PM   #29
parawolf
beep beep
 
Join Date: Dec 2004
Location: Melbourne
Posts: 1,971
Default

Quote:
Originally Posted by MaD_KiWi
um, i have all that, so facts straight first please :
Either way mate, its a top effort... i'd love to see some of the details of your rebuild
py:
__________________
Nothing to see here, move along, move along...
parawolf is offline   Reply With Quote Multi-Quote with this Post
Old 27-04-2005, 09:29 PM   #30
XRQTOR
Banned
 
XRQTOR's Avatar
 
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
Default

Ca someone please explain this cross ply stuff, tailshaft loop what do they do.
XRQTOR is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL