|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-03-2021, 10:55 AM
|
#1 | ||
|
mechanical novice hopeful
 Join Date: Feb 2018
Location: Melbourne
Posts: 534
|
I have a nice low km HP XR6 S2 auto that I picked up without the Tickford engine.
So have decided to convert it to a VCT engine and a manual transmission. That should give me the fastest possible stock AU i6 for the least $? (even with the current stock i6 I am amazed a how much quicker the live axle HP feels compared to my other 2 IRS VCT XR6's...a manual and an auto) Have now collected all the parts. (I am not sure which VCT ECU I will use yet?...maybe a TI J3 I have?...or maybe I should buy the specific BPR J3?). Instead of replacing the engine wiring loom, I was planning to just run the extra wire from the engine bay to the ECU. Is it as simple as running the extra wire from the VCT actuator in the engine bay to pin 72 on the ecu? Has anyone done this or knows exactly what I need to do? Thanks for any advice in advance. |
||
|
|
How to run extra wire to ECU for VCT conversion?
Linear Mode
