|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-12-2022, 02:44 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2022
Posts: 24
|
Hi guys,
Has anyone fitted retractable rear belts to a 4 door mk2? If so what did you use and did you need to make any modifications to the car or the belts to get them to work? One of my rear lap/sash belts is a bit buggered, and if I'm going to replace them it would be good to put retractable one is to make it a little safer for the kids. |
||
|
|
|
07-12-2022, 03:30 PM
|
#2 | |||
|
Former BTIKD
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
|
Quote:
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
|
|||
|
|
|
|
07-12-2022, 06:58 PM
|
#3 | ||
|
Starter Motor
Join Date: Nov 2022
Posts: 24
|
That's a very good point... I thought that if it was using the original lap/sash mounts, that fitting newer belts wouldn't require engineering... But maybe the change from static to retractable would?
|
||
|
|
|
|
09-12-2022, 10:44 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,863
|
the upper mount points on the parcel shelf should be strong enough so no need for engineering, but I found that it was incredibly difficult to mount the retractor there at the top because the shelf sits lower than the top of the rear seat. You will need some kind of dogleg bracket to lift the retractor up a bit.
I didn't even consider fitting the retractor at floor level but that might be a possibility. I gave up and refitted static lap/sash belts in the 73 |
||
|
|
|
Inertia/Retractable rear seatbelts for Mk2 4d Escort
Linear Mode
