Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Ford Coupe Club of Australia > General Discussions

Reply
 
Thread Tools Display Modes
Old 17-12-2010, 07:02 AM   #421
dj5800
Regular Member
 
dj5800's Avatar
 
Join Date: Dec 2006
Location: Central Coast, NSW
Posts: 273
Default Tailshaft

I am after a tailshaft for my coupe, 351, C4 to 9".
I have a tailshaft from a sedan but it does not suit the 9" uni. apparently i can change the yoke in the 9".
If anyone has either part please let me know.
Located near sydney.
dj5800 is offline   Reply With Quote Multi-Quote with this Post
Old 21-12-2010, 05:20 PM   #422
Tha Jack
Legend!!!
 
Tha Jack's Avatar
 
Join Date: Jun 2007
Posts: 907
Default

Hey Guys,

Im on the hunt for a Right Hand Rear Quater Panel for a coupe.
Any one know where I can get one?
(I know they are rare as rocking horse poop)

Cheers Jack
__________________
BARE BONES RACING

BACK TO THE BONE YARD
Tha Jack is offline   Reply With Quote Multi-Quote with this Post
Old 21-12-2010, 05:52 PM   #423
ThaFlash
Trusted Seller
 
Join Date: Oct 2010
Location: Franganastan
Posts: 909
Default

edit:
tha jack, a person i know used the front guard off a sedan as a rear 1/4.

i am not sure which coupe you are referring to but it was done with an XB Coupe front guard and put on the back.
ThaFlash is offline   Reply With Quote Multi-Quote with this Post
Old 21-12-2010, 06:39 PM   #424
XA-MONT
The Cam Distoryer >:)
 
XA-MONT's Avatar
 
Join Date: Nov 2005
Location: Bairnsdale, Victoria
Posts: 2,124
Default

I think you are slightly mistaken HP4ME, the front wheel arches can be used to rebuild the rear wheel arches on a coupe, but if he wants an entire rear quarter panel i am assuming there is more damage than just the wheel arches.
__________________
  • CURRENT CAR: XC Rally pack Ute , 351c on gas, auto, cruisey goodness!
  • CURRENT MOTORBIKE: 99 Aprilia RSV1000 streetfighter (08 fireblade tail, 05 Tuono suspension, no fairing, lots of other little changes) and a DRZ400 for the dirty days
  • RESTING: XA Fairmont Coupe.
XA-MONT is offline   Reply With Quote Multi-Quote with this Post
Old 21-12-2010, 08:46 PM   #425
ThaFlash
Trusted Seller
 
Join Date: Oct 2010
Location: Franganastan
Posts: 909
Default

thanks XA-MONT that's sounds more like what I was getting at.

Though a good portion of the sedan front guard was used on mine length wise and including (what I call) the lateral line.
ThaFlash is offline   Reply With Quote Multi-Quote with this Post
Old 21-12-2010, 11:17 PM   #426
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
Default

Quote:
Originally Posted by dj5800
I am after a tailshaft for my coupe, 351, C4 to 9".
I have a tailshaft from a sedan but it does not suit the 9" uni. apparently i can change the yoke in the 9".
If anyone has either part please let me know.
Located near sydney.
First you will need to work out what size uni you have on the tail shaft and what size yoke you have on the 9"...there are really only two main sizes used on the 9" in Australia.

1310 and 1330.

1330 being the bigger one, also refered to by some people as GTHO Yoke.

So you will have either one of those. All you need to do is buy the correct uni for you application and fit it to the tailshaft and you are done, you either buy 1310 to 1310 (if you have small yoke and tail shaft) or 1330 to 1330 (if you have large tail shaft and yoke) and the one you probably need 1310 to 1330 which will convert one size to the other.

Cheaper than a new tail shaft or new yoke.
XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 22-12-2010, 12:47 PM   #427
dj5800
Regular Member
 
dj5800's Avatar
 
Join Date: Dec 2006
Location: Central Coast, NSW
Posts: 273
Default

Quote:
Originally Posted by XB GS 351 Coupe
First you will need to work out what size uni you have on the tail shaft and what size yoke you have on the 9"...there are really only two main sizes used on the 9" in Australia.

1310 and 1330.

1330 being the bigger one, also refered to by some people as GTHO Yoke.

So you will have either one of those. All you need to do is buy the correct uni for you application and fit it to the tailshaft and you are done, you either buy 1310 to 1310 (if you have small yoke and tail shaft) or 1330 to 1330 (if you have large tail shaft and yoke) and the one you probably need 1310 to 1330 which will convert one size to the other.

Cheaper than a new tail shaft or new yoke.
yeah, thanks for that, have spoken with Pieter from http://www.mrtshafts.com.au/ContactUs.htm he has been great and is sending me a 'cross uni' as you have described above.
dj5800 is offline   Reply With Quote Multi-Quote with this Post
Old 28-12-2010, 06:08 PM   #428
Tha Jack
Legend!!!
 
Tha Jack's Avatar
 
Join Date: Jun 2007
Posts: 907
Default

Quote:
Originally Posted by Tha Jack
Hey Guys,

Im on the hunt for a Right Hand Rear Quater Panel for a coupe.
Any one know where I can get one?
(I know they are rare as rocking horse poop)

Cheers Jack
Just found out that new repo ones will be available in november next year .
unfortunately I cant wait that long
I may be able to use the front half of a ute side panel.
__________________
BARE BONES RACING

BACK TO THE BONE YARD
Tha Jack is offline   Reply With Quote Multi-Quote with this Post
Old 28-12-2010, 07:51 PM   #429
buggerlugs
If it ain't broke........
Donating Member1
 
Join Date: Dec 2007
Location: Sunshine Coast Qld
Posts: 18,827
Default

Jack , on my XCcoupe we used a front right guard for the rear left guard and vice versa. I had rust issues around the arches..........
__________________
Visitors welcome
Relatives by appointment only
buggerlugs is offline   Reply With Quote Multi-Quote with this Post
Old 29-12-2010, 09:11 AM   #430
Tha Jack
Legend!!!
 
Tha Jack's Avatar
 
Join Date: Jun 2007
Posts: 907
Default

The main part I need is the half section that is from the middle of the wheel arch towards the drivers door.
Thanks Guys
__________________
BARE BONES RACING

BACK TO THE BONE YARD
Tha Jack is offline   Reply With Quote Multi-Quote with this Post
Old 29-12-2010, 12:17 PM   #431
Geez Louise
Awesome
 
Geez Louise's Avatar
 
Join Date: Oct 2007
Location: In my own little world..Everyone here knows me :)
Posts: 9,401
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: All the behind the scenes things that help the community. 
Default

To clear up a bit of confusion, the section below is what we are looking for. This section needs to be replaced on my coupe and the rebuild is on hold until I can find a replacement panel.



It has been repaired there previously and the metal is really thin.

Cheers
Coll
__________________
Geez Louise is offline   Reply With Quote Multi-Quote with this Post
Old 29-12-2010, 12:54 PM   #432
buggerlugs
If it ain't broke........
Donating Member1
 
Join Date: Dec 2007
Location: Sunshine Coast Qld
Posts: 18,827
Default

Oh, ok. I have only ever seen one on E-Bay and they were asking $1500 for it.........
__________________
Visitors welcome
Relatives by appointment only
buggerlugs is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2011, 10:51 AM   #433
greenjgs
Regular Member
 
greenjgs's Avatar
 
Join Date: May 2009
Posts: 276
Default RH B Pillar

Hi All

I'm looking for a RH B Pillar Skin from a Coupe, PV or Ute if anyone has one.

Cheers Graeme
greenjgs is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2011, 11:13 AM   #434
THE4RD
Landau - personal luxury
 
THE4RD's Avatar
 
Join Date: May 2005
Location: Melbourne
Posts: 474
Default

Quote:
Originally Posted by Geez Louise
To clear up a bit of confusion, the section below is what we are looking for. This section needs to be replaced on my coupe and the rebuild is on hold until I can find a replacement panel.



It has been repaired there previously and the metal is really thin.

Cheers
Coll
Give Tin West a call. They could probably make one up using the original panel as a template.

http://www.yellowpages.com.au/vic/we...0-listing.html
__________________
BF LTD - cruiser with the lot
Landau - coupe with the lot - currently being rebuilt here My Landau Rebuild Thread
THE4RD is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2011, 11:15 AM   #435
memphis2k
Regular Member
 
Join Date: Feb 2009
Posts: 326
Default

Quote:
Originally Posted by greenjgs
Hi All

I'm looking for a RH B Pillar Skin from a Coupe, PV or Ute if anyone has one.

Cheers Graeme
I will be wrecking a ute that is relatively rust free next week, drop me a PM.
memphis2k is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2011, 01:50 PM   #436
greenjgs
Regular Member
 
greenjgs's Avatar
 
Join Date: May 2009
Posts: 276
Default

PM sent thanks
greenjgs is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2011, 07:06 PM   #437
danthefordman
Leftyos
 
Join Date: Nov 2007
Location: North Coast
Posts: 415
Default

Quote:
Originally Posted by memphis2k
I will be wrecking a ute that is relatively rust free next week, drop me a PM.
Dont suppose you have the chrome trim off the windscreen by any chance. Need the top piece specifically. They do fit a coupe don't they?


Also chasing honeycomb trim off the back below the boot lid if any one has any.

Cheers

Dan
__________________
Fat *** coupe lover
danthefordman is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2011, 09:45 PM   #438
Coupes and More
Formerly HAMFIST
 
Coupes and More's Avatar
 
Join Date: Feb 2009
Posts: 1,706
Technical Contributor: For members who share their technical expertise. - Issue reason: The work he does and the quality for his age is inspiring. keeps me always looking at his thread and a lot of people seem to get a better understanding on how to do things and what can be saved by his photo full threads 
Default

Quote:
Originally Posted by danthefordman
Dont suppose you have the chrome trim off the windscreen by any chance. Need the top piece specifically. They do fit a coupe don't they?


Also chasing honeycomb trim off the back below the boot lid if any one has any.

Cheers

Dan
you will find the top piece of windscreen chrome is coupe only and none you find will fit, they will to short but if you get 2 sedan bits of trim cut them and join the abit like the bottom piece it should do ok
Coupes and More is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2011, 09:38 PM   #439
danthefordman
Leftyos
 
Join Date: Nov 2007
Location: North Coast
Posts: 415
Default

Quote:
Originally Posted by Coupes and More
you will find the top piece of windscreen chrome is coupe only and none you find will fit, they will to short but if you get 2 sedan bits of trim cut them and join the abit like the bottom piece it should do ok
I know the sedan trim doesn't work as is, couple inches too narrow but are you saying the ute is too short as well. I assumed since the doors on utes are the same for coupes and vans (different glass i know) that the roof line was also the same. We tried with a sedan piece but the curves are different as well so it is a little more difficult than just a cut and shut. Looks bodgy too.
__________________
Fat *** coupe lover
danthefordman is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2011, 11:07 AM   #440
King Neptune
Regular Member
 
King Neptune's Avatar
 
Join Date: May 2008
Location: Vic
Posts: 192
Default

I was of the opinion that utes were the same as coupes, but utes are definately the same as p/vans, & from memory the pv screens are sedan. I'm happy to be corrected, but I'm pretty sure.
Cheers Rob.
King Neptune is offline   Reply With Quote Multi-Quote with this Post
Old 09-01-2011, 09:38 PM   #441
JG65TE
FF.Com.Au Hardcore
 
JG65TE's Avatar
 
Join Date: Jun 2009
Posts: 1,600
Default

yup coupe is coupe, sedan,panno,wagon and ute are all the same.
JG65TE is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2011, 07:36 AM   #442
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,839
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default

Hey Guys
Chasing the following parts for my Landau
1. Landau Emblem suitable for rechroming (no pitting etc)
2. Landau rear vinyl roof moulds (or just the large passenger side piece as the rest are fine)
3. Front and Rear Overriders
4. Bonnet hinges/springs - mine are a little tired and want a better set
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2011, 09:42 AM   #443
zeuss000
FF.Com.Au Hardcore
 
Join Date: Feb 2007
Location: Collingwood Park, (S.W.Qld)
Posts: 641
Default

Hi Folks, i am chasing a front spoiler / air dam? and rear moulded type spoiler to suit an XC. i am in Brisbane area but don't mind paying shipping,
Cheers
Ed
zeuss000 is offline   Reply With Quote Multi-Quote with this Post
Old 12-01-2011, 06:44 PM   #444
GT-GTF
FF.Com.Au Hardcore
 
GT-GTF's Avatar
 
Join Date: Mar 2008
Posts: 954
Default

Hi All - I'm chasing a driver's side xb coupe door.
GT-GTF is offline   Reply With Quote Multi-Quote with this Post
Old 16-01-2011, 09:43 PM   #445
dj5800
Regular Member
 
dj5800's Avatar
 
Join Date: Dec 2006
Location: Central Coast, NSW
Posts: 273
Default power steer bracket

after power steering bracket which bolts to the block for the tear drop shaped power steering pump.
dj5800 is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2011, 06:30 PM   #446
CJR09
RPO 77
 
CJR09's Avatar
 
Join Date: Feb 2006
Posts: 1,945
Default

guys chasing xa gt/gs dash fascia - no instrumentation just fascia

also xa 302c 550 wide radiator/fan shroud

cheers
__________________


Q: If you have tried to sell it three times now and it is still not sold, do you think it might be over-priced?

A: It is over priced - just like all the other falcon coupes for sale!!


Last edited by CJR09; 17-01-2011 at 06:31 PM. Reason: .
CJR09 is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2011, 06:35 PM   #447
GT-GTF
FF.Com.Au Hardcore
 
GT-GTF's Avatar
 
Join Date: Mar 2008
Posts: 954
Default

Im also after a second hand rear window rubber pls!
GT-GTF is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2011, 12:37 AM   #448
darkside
FF.Com.Au Hardcore
 
darkside's Avatar
 
Join Date: Aug 2006
Location: ipswich
Posts: 522
Default

looking for interior light wiring and rear pillar courtasy lights and wiring that plugs into rear loom ,the things that dissapear in rebuilds ...doc
darkside is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2011, 07:21 AM   #449
GT-GTF
FF.Com.Au Hardcore
 
GT-GTF's Avatar
 
Join Date: Mar 2008
Posts: 954
Default

I have found an old rubber from one of my old restos so I will reuse it.

I am still chasing a driver's door (xb).
GT-GTF is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2011, 07:41 AM   #450
BTTB
Free XD
 
BTTB's Avatar
 
Join Date: Dec 2004
Location: SE burbs of Melbourne
Posts: 2,682
Default

Quote:
Originally Posted by zeuss000
Hi Folks, i am chasing a front spoiler / air dam? and rear moulded type spoiler to suit an XC. i am in Brisbane area but don't mind paying shipping,
Cheers
Ed
If you mean the "Cobra Style" front and rear spoilers...
they are readily available from numerous Aftermarket Suppliers

One of the site sponsers might even have them

eBay too
http://cgi.ebay.com.au/XC-FRONT-SPOI...item27b867429d
BTTB is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:27 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL