Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Ford Coupe Club of Australia > Coupe Restoration & Build

Reply
 
Thread Tools Display Modes
Old 23-01-2013, 08:49 PM   #301
Mr_Meaner
Impressive Member
 
Join Date: Mar 2012
Posts: 143
Default Re: XC Cobra #140

Any updates? This build thread has been fantastic reading.
Mr_Meaner is offline   Reply With Quote Multi-Quote with this Post
Old 24-01-2013, 09:21 AM   #302
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Easter perhaps????
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2013, 11:26 PM   #303
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

After almost 11 years, the end is getting very close. Very soon, the car will be heading back to the panel beaters for its final paint/polish and application of pin stripes, badges and decals (plus other associated bits & pieces).

I have managed to get a few jobs done over the Easter break, some small (fit accelerator pedal, tighten up steering hweel, get the hand brake working, tighten up the sun visor retainer) and some a bit bigger (with pics).

First up was the front tyres. I had originally fitted the Yokohama 352 245 15's all around. Unfortunately, the front ones where rubbing on the spoiler bracket. Yokohama 352 235's are no longer available so I ended up buying something that was as close as possible: Cooper Cobra 235 15's were recommended, thanks George: so I got 2 from eBay.

Here are a few pics of the Yoky's and the Cobra's






And a few on the car




Next up was the washer bottle, quick simple job


As was the boot lock latch


I had also recently bought the radiator side air deflectors, fitted ok




Seats were sitting too high (they had sedan supports underneath the seats), so these had to be changed as well.


There are only a few more jobs to do; install washer arm linkage along scuttle panel, carburetor choke tubes, get the two front seat belts re-webbed (and then fitted), connect all of the lights and paint and fit the air cleaner

These are the bits left to go on


When the car is at the panel beaters, the last of the bits will go on


Thanks to the mysterious NOS donater (black 5.8 badges).


Whilst the car is at the panel beaters, the rear scoop will be painted and fitted as well (it's been there for the last 8 years).
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2013, 11:31 PM   #304
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,839
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: XC Cobra #140

On the home straight Paul.

Can't wait to see it turn a wheel (preferably in anger!)
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2013, 11:40 PM   #305
zoesgift
FF.Com.Au Hardcore
 
Join Date: May 2010
Posts: 1,870
Smile Re: XC Cobra #140

what a fantastic thread...very helpful with pics and tips. its one thing to have the skill its another thing to share the knowledge. like George said cant wait to see this car complete and in the flesh. I don't car if its not in anger either!
zoesgift is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 07:34 PM   #306
Cabbage
FF.Com.Au Hardcore
 
Cabbage's Avatar
 
Join Date: Apr 2008
Posts: 1,264
Default Re: XC Cobra #140

an exceptional build Paul, nice one.
Cabbage is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 08:41 PM   #307
Sam
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 632
Default Re: XC Cobra #140

Love this build Paul, absolute attention to detail.
Sam is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 10:23 PM   #308
Resurrection
I was correct - AGAIN
 
Resurrection's Avatar
 
Join Date: May 2010
Location: Third rock from the sun
Posts: 1,801
Default Re: XC Cobra #140

Just stumbled across this thread. Amazing you had the patience all these years to persevere with the rebuild. I would love to see the look on your face the first time you get to drive the car. Not far away now.
Resurrection is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2013, 06:43 AM   #309
GT-GTF
FF.Com.Au Hardcore
 
GT-GTF's Avatar
 
Join Date: Mar 2008
Posts: 954
Default Re: XC Cobra #140

Paul, you aare to be commended for both the level of attention to detail in your restoration and your generosity in documenting the restoration for others to share.
GT-GTF is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 03-04-2013, 05:21 PM   #310
xapete
Regular Member
 
Join Date: Mar 2013
Location: Perth
Posts: 27
Default Re: XC Cobra #140

WOW just read this thread build .Awesome job in rebuilding this great car.
xapete is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2013, 09:48 PM   #311
Scooter
FF.Com.Au Hardcore
 
Scooter's Avatar
 
Join Date: Jan 2009
Location: Perth
Posts: 1,633
Default Re: XC Cobra #140

Any updates Paul?
Scooter is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2013, 10:16 PM   #312
Sam
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 632
Default Re: XC Cobra #140

My favourite thread, love you work Paul
Sam is offline   Reply With Quote Multi-Quote with this Post
Old 13-07-2013, 12:42 AM   #313
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Scooter View Post
Any updates Paul?
Nope.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 27-07-2013, 06:25 PM   #314
Scooter
FF.Com.Au Hardcore
 
Scooter's Avatar
 
Join Date: Jan 2009
Location: Perth
Posts: 1,633
Default Re: XC Cobra #140

Quote:
Originally Posted by Paull View Post
Nope.
Bugger! Oh well, good things come to those who wait. She is looking close though?
Scooter is offline   Reply With Quote Multi-Quote with this Post
Old 28-07-2013, 12:46 PM   #315
SCJCoupe
Regular Member
 
SCJCoupe's Avatar
 
Join Date: Aug 2011
Location: Perth WA
Posts: 216
Default Re: XC Cobra #140

Is there a big reveal planned for the October All Ford Day?
SCJCoupe is offline   Reply With Quote Multi-Quote with this Post
Old 28-07-2013, 06:19 PM   #316
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by SCJCoupe View Post
Is there a big reveal planned for the October All Ford Day?
October 2014 is more like it.

No, nothing is happening on the car. I have been busy with everything else of late and can't say I am all that interested in working on the car at the moment.

I have however just spent 3 days working on the XD and it is coming up a real treat.



There has been one small addition to the Cobra though - headlight protectors, thank you Marcus.

Paull is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 28-07-2013, 07:28 PM   #317
Revolver
Big Member
Donating Member1
 
Revolver's Avatar
 
Join Date: Dec 2009
Location: SE Qld
Posts: 5,874
Default Re: XC Cobra #140

Mr Multiple projects!

How's the camper coming along??
__________________
The Scarlet Fairlane: 94 5.Slow Litre NC II Fairlane 488800kms & Climbing
Rollin' on genuine ELGT wheels.
K&N Filter
/////Alpine Sound.
EBGT Momo Woodgrain Steering Wheel
The Scarlet Fairlane Build Thread

Project "White Knight"
93 ED XR6
ROH Alloys
Momo wheel
Cruise
Sunroof
Premo Sound
Manual
HO Goodies
PWK Build Thread

1990 Yamaha FZR 250: 59000ks & climbing. New fairing, old tank, my angry mosquito in a coffee tin! 14.977 1/4mile.
Revolver is offline   Reply With Quote Multi-Quote with this Post
Old 04-08-2013, 03:28 PM   #318
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Revolver 45 View Post
How's the camper coming along??
No change of late (work done as such) but it is still seeing regular usage. I will however soon be changing from 4.11:1 gears to 3.5:1. Other than that, all is good.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2013, 05:01 PM   #319
BOSSGTE
Regular Member
 
BOSSGTE's Avatar
 
Join Date: Dec 2012
Location: Melbourne - Bayside
Posts: 160
Default Re: XC Cobra #140

This build is epic. Thank you. Although, I have a feeling that watching your attention to detail may cost me a lot of money when it comes time to rebuild my XC.
__________________
2011 FG MKII GT-E Smoke
320rwkw X-Force catback + BMC Filter

1978 XC Fairmont 302 - Grandpa Spec
BOSSGTE is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-08-2013, 09:55 AM   #320
Maso78
BF RTV & XC Falcon
 
Maso78's Avatar
 
Join Date: Dec 2009
Location: Hawkesbury Region
Posts: 44
Default Re: XC Cobra #140

Thanks for sharing this build, this is one of my favorite cars.

Can't wait to see the end result.
Maso78 is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2013, 04:24 PM   #321
kitdoctor
Regular Member
 
kitdoctor's Avatar
 
Join Date: May 2011
Posts: 226
Default Re: XC Cobra #140

Yep great thread....not long to go. Thanks for sharing.
kitdoctor is offline   Reply With Quote Multi-Quote with this Post
Old 18-10-2013, 09:10 AM   #322
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Some updates

Boot lock mechanism cover has now been fitted



Choke tubes as well. Tip: if you are going to fit these, do it whilst you have the engine out, it is much easier







Boot carpet is also in



Along with the super expensive long range tank spacer (not!)



Prior to the carpet going in, the spare wheel bracket also went in. Pic of the spare in the boot



And this is how it sits now



Car has been washed and effectively put to bed for now. I now have to save up enough money to get it back to the panel beaters for the final works. I also have to wait for a spot in his calender. So that's it for now.
Paull is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 20-10-2013, 09:13 AM   #323
kitdoctor
Regular Member
 
kitdoctor's Avatar
 
Join Date: May 2011
Posts: 226
Default Re: XC Cobra #140

Epic thread....can't wait til next update.
kitdoctor is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-02-2014, 02:45 PM   #324
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Another crappy job off the list - windscreen wiper mech. Any person with an XC knows what a terrible design the wiper mech is in these cars.

This how they usually end up looking




As expected, my one needed work and have been avoiding the job for quite some time. At any rate, had to get on with it so the first step was to buy a set of repro XD wiper arms

XD wiper arms

I actually bought these from Superoo Falcon spares: saved $40 too.

I then removed (carefully) the new nylon fittings - new one and one with bush already removed



It was then a case of "massaging" the bush and retainer ring to fit. Once fitting correctly, I then assembled and glues together with superglue



Once all assembled, motor and mechanism was tested without issue.

And this is how it looks now, much happier that this job is done

Paull is offline   Reply With Quote Multi-Quote with this Post
6 users like this post:
Old 11-03-2015, 10:57 PM   #325
tony302coupe
Regular Member
 
Join Date: Sep 2006
Location: Perth
Posts: 114
Default Re: XC Cobra #140

This is looking fantastic, Any updates...
tony302coupe is offline   Reply With Quote Multi-Quote with this Post
Old 07-06-2015, 11:21 AM   #326
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by tony302coupe View Post
This is looking fantastic, Any updates...
Not much to speak of Tony. The only things done of late are as follows;
1) internal rear view mirror has been applied
2) 3rd go at the wheel alignment and now all is correct

Back on the trailer again for wheel alignment as the first go was completely wrong, the second go, the wheels were too wide and third time is a charm


And it is just sitting waiting patiently for its next trip to the panel beaters


I have recently spoken with the panel beater as the car has to go back to get a fair bit of work done. All of this has to be finished before I can complete the car. It is currently booked in for late July, early August. The following is what has to be done whilst at the panel beaters;

Repair small areas of damaged paint
Block back and polish the whole car
Paint and fit the rear bobtail spoler
Apply the Blaze Blue pinstriping
Paint and fit the front windsrceen moulds
Paint and fit the petrol cap and surround

Once all of this has been done, I can then finish by fitting all external components such as decal, badges, door handles, indicator lights, windscreen wipers, door locks as well as fit the door cards (along with grabhandles/window switches etc). In that, I am hoping to have the car done by October.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2015, 08:01 PM   #327
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

After 10 years, #140 has made its way back to the same panel beater. As per the above job list, hopefully in 4 to 6 weeks, all will be complete.



More updates to follow over the next month or so.
Paull is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
Old 22-08-2015, 08:11 PM   #328
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,839
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: XC Cobra #140

Add to list.

Apply NOS 5.8 badges.
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 23-08-2015, 01:31 AM   #329
jstanovic
FF.Com.Au Hardcore
 
Join Date: Feb 2013
Location: Perth
Posts: 830
Default Re: XC Cobra #140

Simply awesome build. I have just read from the start, I keep having to remind myself that this thread has evolved over many years, not just the 2 hours I have spent ogling the pics!

One question, why do restore multiples of parts as opposed just what you need? For example, how many air cleaners do you think you will need haha?!?!
jstanovic is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2015, 08:47 AM   #330
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,291
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by gcg2503
Add to list.

Apply NOS 5.8 badges.
Yep, hopefully those excellent badges, that I got from a great bloke, plus all decals, will be the last job that is to be done on the car

Quote:
Originally Posted by jstanovic View Post
Simply awesome build. I have just read from the start, I keep having to remind myself that this thread has evolved over many years, not just the 2 hours I have spent ogling the pics!

One question, why do restore multiples of parts as opposed just what you need? For example, how many air cleaners do you think you will need haha?!?!
Bought in June 2002 and hopefully finished by years end, well, maybe

In regards to restoring multiples of, I have a very simply philosophy: "It is better to look at it, than look for it". Put more simply, as I am also restoring another P6 LTD, plus my XD, I will also be restoring a few more P6 LTD's in years to come. Another reason is that when you have a bunch of parts cleaned/blasted/painted, you can then chose the best of the bunch.
Paull is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL