![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Starter Motor
Join Date: Apr 2016
Posts: 13
|
Two of the rims on my Fiesta WQ 2005 are dented. It is pretty hard to get wheels for these as they are pretty much the first thing to disappear when a Fiesta comes up for wrecking. The steelies are apparently almost always bent in some way as well making them difficult or impossible to balance.
I have found some Ford Focus 4x108 PCD 15x6 alloys, but they have an offset of 52 which is 4mm positive of the default (I could be wrong). If I use 195/50/R15 tyres am I likely to have any issues with rubbing on the wheel well? |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Starter Motor
Join Date: Jul 2014
Posts: 6
|
I doubt it, from everything I've read you need to have +20mm wider plus 17s (maybe 16s but I don't think so) to rub.
I'm amazed at how light on the ground wheels for the fiesta are! |
||
![]() |
![]() ![]() |