|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Early Falcon Car Club of Qld Inc The Queensland early model Falcon Club. |
 |
|
|
Thread Tools | Display Modes |
|
|
19-08-2013, 07:10 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2010
Posts: 3
|
hi can a new door mechanism be bought or is there another way to fix,,, the spline where it comes out of winding bit is worn
|
||
|
|
|
13-05-2014, 07:54 AM
|
#2 | ||
|
Starter Motor
Join Date: May 2014
Posts: 1
|
Love some help with this also guys
|
||
|
|
|
|
19-11-2014, 10:07 PM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2013
Posts: 19
|
get a good old spline cut that off and mig weld on the new old one or change the hole thing thats what i would do.or you could go to some swop meets and find a door i was at the bendigo swop meet and they had 4 doors for 50 bucks each. check the pinkys web site and lok for swop meets .
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
door mechanism loose xm
Hybrid Mode